Description:
MG995 StandardServo Pack contains a MG995 standard servo, a Servo Hub, a servo bracket and some hardwares. MG995 servo is a simple, commonly used standard servo for your mechanical needs. It comes with a stardard 3 pin power and control cable for easy using. With the servo hub and servo bracket, it may be convenient to connect the servo with other parts. A Me RJ25 Adapter also help you to connect the servo with Me Baseboard or Makeblock Orion easily.
Part List:
MG995 Standard Servo x 1
Servo Bracket A x 1
Screw M4*8 x 4
MG995 Servo hub x 1
Servo Specification:
Mechanical Specification:
| Item |
Specification |
| Size |
40.4*19.9*37.5mm |
| Weight |
58g |
| Gear type |
5 Metal Gear |
| Limit angle |
180°±5° |
| Bearing |
DUAL BB |
| Horn gear spline |
? |
| Horn type |
Metal |
| Case |
Engineering plastics(Polyamide) |
| Connector wire |
FP: 240mm±5mm JR: 300mm±5mm |
| Motor |
DC motor |
| Splash water resistance |
No |
Electrical Specification:
| Item |
Specification |
| Operat voltage |
4.8V |
| Idle current |
5mA |
| No load speed |
0.17sec/60° |
| Runnig current |
350mA |
| Peak stall torque |
9.0kg.cm |
| Stall current |
1500mA |
Control Specification:
| Item |
Specification |
| Command signal |
Pulse width modification |
| Amplifier type |
Digital controller |
| Pulse width range |
500~2500usec |
| Neutral position |
1500usec |
| Running degree |
180±2°(when 500~2500usec) |
| Dead band width |
4 usec |
| Rotating direction |
Counterclockwise (when 500~2500usec)
|
| Diğer Özellikler |
|---|
| Stok Kodu | MKB-95029 |
| Marka | MakeBlock |
| Stok Durumu | Var |
Havale / Eft :
Havale İle : 973,74 TL
Kapıda Ödeme :
Kapıda Ödeme ile : 1.003,86 TL
Tek Çekim :
Kredi Kartı ile : 1.003,86 TL
Mağazamızda taksit için en az 3000 TL lik ürünü sepete eklemeniz gerekir
