Odroid USB3.0 to SATA Bridge Board + USB 3.0 to Micro USB Kablo dahil

AÇIKLAMA

ODROID-XU4'ünüzü SSD veya HDD ile bir sonraki depolama performansı seviyesine yükseltin.

USB3.0 - SATA Köprü Kartı, tek bir 2,5" SATA HDD/SDD'nin arayüzlenmesine olanak tanıyan bir USB3.0 - SATA3 denetleyicisi (Genesis GL3321G) içerir.

USB3.0 - SATA Köprü Kartı, depolamaya veri ve güç sunar.

Özellikler

USB3.0 to SATA Bridge Board

Boost your ODROID-XU4 to the next level of storage performance with SSD or HDD. 
USB3.0 to SATA Bridge Board contains a USB3.0 to SATA3 controller (Genesis GL3321G) allowing interfacing of a single 2.5" SATA HDD/SDD. 
USB3.0 to SATA Bridge Board offers data and power to the storage.

- Dimension : 48 x 29 x 6 mm (approx., including connector)
- Interface : Micro-USB3.0
- Connector : Compatible with 2.5inch SATA HDD / SSD
- Control IC : GL3321G2

- Schematics : DOWNLOAD

PERFORMANCE
 

n SSD write and read tests with ODROID-XU4 USB 3.0 on Linux platform in the real world. Write test dd if=/dev/zero of=test oflag=direct bs=4M count=256 256+0 records in 256+0 records out 1073741824 bytes (1.1 GB) copied, 8.3077 s, 132.4 MB/s Read test dd if=test of=/dev/null iflag=direct bs=4M 256+0 records in 256+0 records out 1073741824 bytes (1.1 GB) copied, 7.4352 s, 144 MB/s An SSD write and read tests with ODROID-C1 USB 2.0 on Linux platform in the real world. Write test dd if=/dev/zero of=test oflag=direct bs=4M count=256 256+0 records in 256+0 records out 1073741824 bytes (1.1 GB) copied, 30.8774 s, 34.8 MB/s Read test dd if=test of=/dev/null iflag=direct bs=4M 256+0 records in 256+0 records out 1073741824 bytes (1.1 GB) copied, 28.6036 s, 37.5 MB/s   PACKAGE INCLUDES - USB3.0 to SATA Bridge Board - Micro-USB3.0 Cable (400mm approx.) - 4 x Black rubber rings (it is necessary when you install a HDD/SDD into the VuShell for VU7.)

BOARD DETAIL SET-UP with ODROID-XU4 and SSD