ODROID-C2/C1+ Muhafaza Kutusu
Bu kılıfları çıplak PCB kartının güzelliğini takdir eden ancak yine de ODROID-C2/C1+'ı tozdan ve hava koşullarından korumak isteyenler için tasarladık. Yarı şeffaf kasanın GPIO bağlantı noktası da dahil olmak üzere tüm çıkışlar için açıklıkları vardır ve bu da onu harici donanıma bağlı projeler için mükemmel bir uyum sağlar.
Özellikler
Strong & Durable Polycarbonate Plastic
Size : 90 x 59 x 28 mm
Weight : 32g
The drawings of the plastic case is supplied in AutoCAD format.
DWG file :
Download HERESTEP file :
Download HERE
Side View
There are openings for Ethernet, 4 x USB Host, microUSB, HDMI and DC Jack.
The cover over GPIO pins can be easily removed by cutting of a few ribs and will give you easy access to the GPIO port. If you are using the USB-UART Module kit, the cable can also be routed through this opening. |
Bottom View
Fit the ODROID-C2 / C1+ in the case using the locking tabs and secure it using two included screws through the screw holes on the bottom side. A spare screw is included in the package. You will need a small screwdriver.
This case has more vent holes on the bottom side and has a slot for your MicroSD card. |
 |
 |
Diğer Özellikler |
Stok Kodu | DEV-02120-3 |
Marka | Hardkernel |
Stok Durumu | Var |
Yararlanmak istediğiniz kampanyaları seçip, ODROID-C2/C1+ Case- ODROID-C2/C1+ için Muhafaza Kutusu ürününü sepete ekleyiniz.
Havale / Eft :
Havale İle : 189,10 TL
Kapıda Ödeme :
Kapıda Ödeme ile : 192,96 TL
Tek Çekim :
Kredi Kartı ile : 192,96 TL
Mağazamızda taksit için en az 250 TL lik ürünü sepete eklemeniz gerekir