Alışveriş Sepetim
33,3
36,1

Bambu Lab A1 Mini Combo 3D Printer

Fiyat:
428,43 USD + KDV
KDV Dahil:
17.120,00 TL
Havale / EFT:
16.811,84 TL
3.208,86 TL'den başlayan taksit seçenekleri için tıklayın.
Aynı Gün Kargo Kargo Bedava

 

Açıklamalar

 

Bambu Lab A1 Mini Combo

  • Multi-Color Printing
  • Plug-N-Play
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High Speed Precision

Multi-Color Printing

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.



Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.



Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.



 

Plug and Play

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.


 

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.



 

Bed Slinger, with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.




Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.






 

Bambu Lab A1 Mini Combo Tech Specs

A1 Mini Combo Tech Specs

Item A1 mini Specification
Body Build Volume(W*D*H) 180*180*180 mm³
Toolhead Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 °C
Nozzle Diameter 0.4 mm (Included) 
0.2 mm, 0.6 mm, 0.8 mm
Heatbed Build Plate Bambu Textured PEI Plate (Included) 
Bambu Smooth PEI Plate
Max Build Plate Temperature 80°C
Speed Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head 10000mm/s²
Supported Filament PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET, 
Carbon/Glass Fiber Reinforced Polymer
Not Recommended
Sensors Monitoring Camera Low Framerate Camera (Up to 1080P) 
Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg
A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg

 

 
     
     
   
   
   
     
   
     
   
     
   
     
   
   
   
   
   
     
   

*We would also like to inform our customers that after the period of guaranteed Software Update Support, the Bambu Lab products will continue to work for their entire lifetime, with the same feature availability. Please check the terms of use for more detail.

 


 
Diğer Özellikler
Stok KoduCNC-03090-BMB
MarkaBambu Lab
Stok DurumuVar

 
Bizi Takip Edin DomiRobot Müşteri Hizmetleri Hızlı Erişim  
Twitter Hakkımızda Ödeme Seçenekleri Anasayfa  
      


 
Facebook İletişim Bilgileri Kargo/Teslimat Hakkında Yeni Ürünler
YouTube Banka Hesapları Kullanım Şartları İndirimdekiler
Telegram  DomiPuan Sistemi Gizlilik Politikası Sepetim
    Üye Giriş/Yeni Üye İade ve Garanti Şartları Download
         
  

PlatinMarket® E-Ticaret Sistemi İle Hazırlanmıştır.