• Tüm Kategoriler
    • VuShell for VU7

      VuShell for VU7
      Görsel 1
      DomiPuan : 292
      Fiyat:
      35,78 USD + KDV
      KDV Dahil:
      344,43 TL
      344.43 www.domirobot.com
      41,67 TL'den başlayan taksit seçenekleri için tıklayın.
      Aynı Gün Kargo

      VuShell for ODROID-VU7


      VuShell is a laser cut acrylic enclosure for the ODROID-VU7 and ODROID-VU7 Plus. 
      You can make your own desktop PC with the fancy VuShell. 
      VuShell allows for two different viewing angles. 

      TECHNICAL DETAILS 
      - Dimension : 206 x 206 x 193 mm(approx. assembled)
      - Weight : 395g approx.
      - Color : Smoky Blue and Smoky White
       
      We have two different color choices. Smoky-Blue and Smoky-White. 
       
       
       
      VuShell.jpg Package include

      A. Front piece
      B. Left side piece
      C. Right side piece
      D. Bottom1 piece
      E. Bottom2 piece
      F. Bottom3 piece
      G. Cover piece
      H. 16 x 5 mm screws (Philips dual round head, metal)
      I. 4 x 6 mm screws (Philips pan head, metal)
      J. 8 x 8mm female hex PCB spacers (metal)

      - You need a small Philips bit screw driver. 
      - Laser cut acrylic pieces, screws and spacers are included.

      - ODROID-VU7/VU7plus and related accessories are NOT included

       

      Laser Cutting Video


       
      Assembly Guide for ODROID-C1+

      Note : Please take all steps with special care. Acrylic pieces are easy to crack. 

       
      VuShell.jpg Step 1

      Peel the protective backing off both sides of all the laser-cut parts.
      VuShell.jpg Assemble the front piece first. 

      You will need ODROID-VU7 package, (A), 8 x (H), 4 x (J)
      VuShell.jpg Step 2

      Align a spacer(J) on the bottom side and a screw(H) on the top side. Insert a screw and tighten it carefully. 

      Keep the screw hole empty at the top middle marked with an X in the picture. 

      Check Step4 for the other side of the ODROID-VU7.
      VuShell.jpg Step 3

      You need screws and spacers bundled with ODROID-VU7.

      Align a spacer on the bottom side and a screw on the top side. Insert a screw and tighten it carefully

      You only need to install screws at the 2 points marked with an O in the image. 
      VuShell.jpg Step 4

      Continue using the screws from the ODROID-VU7 bundle. 

      Add screws at the 2 points marked with an O in the image. Insert screws and tighten them gently. 
      VuShell.jpg Step 5

      Plug in the Micro USB link board and the HDMI link board. 
      VuShell.jpg Step 6

      Assemble the front piece(A) with the ODROID-VU7.

      You need 4 x (H). Tighten it gently. 

      Don't tighten too much or the acrylic will crack.
       
      VuShell.jpg Step 7

      Assemble the front piece(A) and right side piece(C). 
      Align the locker on the front piece with the locking hole on the right side piece(C). Apply gentle pressure to it. 
       
      VuShell.jpg Step 8 

      Assemble the bottom1 piece(D). 
      Align the locker on the bottom1 piece(D) with the locking hole on the right side piece(C). 
      Apply gentle pressure to it. 
      VuShell.jpg Step 7

      Assemble the bottom2 piece(E).
      Align the locker on the bottom2 piece(E) with the locking hole on the right side piece(C). 
      Apply gentle pressure to it.
       
      VuShell.jpg Step 8

      Assemble the bottom3 piece(F). 

      Align the locker on the bottom3 piece(F) with the locking hole on the right side piece(C). 
      Apply gentle pressure to it. 
      VuShell.jpg Step9

      Assemble the left side piece(B).

      Align the locker on each piece with the locking hole on the left side piece. Apply gentle pressure to it. 
      VuShell.jpg Step 10

      Align the cover piece(G) on the hole with the left side piece(B) and the right side piece(C). 
      VuShell.jpg Step 11

      Input the power source. 
      VuShell.jpg Tip! Unlocking

      Pinch the edge of the each locker with two fingers. Please be careful not to crack the locker.
      VuShell.jpg Beautifully honeycomb shaped side and ODROID logo back. 
      VuShell.jpg Ideal 2 step viewing angle. 


      Assembly Guide for XU4
       
      VuShell.jpg Step 1

      Peel the protective backing off both sides of all the laser-cut parts.
      VuShell.jpg Step 2

      Align a spacer(J) on bottom side and a screw(H) on top side. 
      Tighten it gently. 
      Leave the screw hole empty at top middle marked with an X in the picture. 
      VuShell.jpg Step 3

      Assemble the front piece(A) with the ODROID-VU7. 

      You need 4 x (H). Tighten it gently. 

      Don't tighten too much or the acrylic will crack.
      VuShell.jpg Step 4

      Align a spacer(J) on bottom side of the ODROID-XU4 and a screw(I) on top side of ODROID-XU4. 
      Insert a screw and tighten it gently. 
      VuShell.jpg Step 5

      Align the screw and spacer installed ODROID-XU4 on the bottom piece(E). 
      VuShell.jpg Step 6

      Give a screw(H) a few easy turns on bottom side. 
      VuShell.jpg Step 7

      If you do not want to install the SATA drive, please skip to Step 11. 

      SATA Bridge Board package is not included. 

      The black rubber rings work as spacers. 
      Align the center of the black rubber ring on the screw hole of SATA drive. 
      Standard SATA drives have 4 screw holes. 
      VuShell.jpg Step 8

      Align the screw hole of the bottom1 piece(D) on top. 
      Give a few easy turn. Please make sure not to tighten it too much. The SATA Bridge board needs 1mm of space between the SATA drive and the bottom1 piece. 
      VuShell.jpg Step 9

      Plug the SATA Bridge board to SATA drive. 

      SATA Bridge board includes
      - SATA Bridge board
      - 4 x black rubber rings
      - USB 3.0 Cable
      VuShell.jpg Step 10

      Plug one side of USB3.0 cable to SATA Bridge board and the other side to USB3.0 port on ODROID-XU4. 
       
      VuShell.jpg Step 11

      Plug Micro-toTypeA USB Cable to USB port on the ODROID-XU4. The cable is bundled with the ODROID-VU7.

       
      VuShell.jpg Step 12

      Plug TypeA-to-TypeA HDMI Cable to HDMI port on ODROID-XU4. The cable is bundled with ODROID-VU7.
      VuShell.jpg Step 13

      Assemble the installed front piece(A) with the left side piece(B). 
      Align the locker on the front piece(A) with the locking hole on the left side piece(B). Hold the front piece(A) and press gently the left side piece(B) with your fingers. 


       
      VuShell.jpg Step 14

      Assemble the bottom1 piece(D).
      Align the locker on the bottom1 piece(D) with the locking hole on the left side piece(B). 
      Press it with your fingers gently. 
      VuShell.jpg Step 15

      Assemble the bottom2 piece(E).
      Align the locker on the bottom2 piece(E) with the locking hole on the left side piece(B). 
      Hold the bottom2 piece(E) and press the left side piece(B) with your fingers gently. 
      VuShell.jpg Step 16

      Assemble the bottom3 piece(F). 
      Align the lock on the bottom3 piece(F) with the locking hole on the left side piece(B). 
      Hold the bottom2 piece(F) and press the left side piece(B) with your fingers gently. 
      VuShell.jpg Step 17

      Pass through the HDMI cable and USB cable via honeycombs. Please check the right honeycomb location from the below image. 
      VuShell.jpg Step 18

      Assemble the right side piece(C).

      Align each locker on each piece with the locking hole on the right side piece(C). And press it gently with your fingers. 
      VuShell.jpg Step 19

      Plug the HDMI cable to the HDMI connector on the ODROID-VU7.
      VuShell.jpg Step 20

      Plug the microUSB cable to microUSB connector on the ODROID-VU7. 
      VuShell.jpg Step 21

      Check that the cables are plugged in correctly. 
      VuShell.jpg Step 22

      Check that all the installation is done correctly. Input the 5V/4A Power Supply through one of honeycomb openings. 
      VuShell.jpg Step 23

      Align the cover piece(G) with the hole on the left side piece(B) and the right side piece(C). 
      VuShell.jpg The desktop version of ODROID-XU4 is here. 
      Diğer Özellikler
      Stok KoduDEV-02130
      MarkaHardkernel
      Stok DurumuVar

      İlginizi Çekebilecek Diğer Ürünler

      Ürün Etiketleri



      Bizi Takip Edin DomiRobot Müşteri Hizmetleri Hızlı Erişim  
      Twitter Hakkımızda Ödeme Seçenekleri Anasayfa  
            


       
      Facebook İletişim Bilgileri Kargo/Teslimat Hakkında Yeni Ürünler
      YouTube Banka Hesapları Kullanım Şartları İndirimdekiler
      Telegram  DomiPuan Sistemi Gizlilik Politikası Sepetim
          Üye Giriş/Yeni Üye İade ve Garanti Şartları Download
               
        

      PlatinMarket® E-Ticaret Sistemi İle Hazırlanmıştır.