• Tüm Kategoriler
    • ODROID-H2+

      ODROID-H2+
      ODROID-H2+
      ODROID-H2+
      ODROID-H2+
      Görsel 1
      Görsel 2
      Görsel 3
      Görsel 4
      DomiPuan : 1.014
      Fiyat:
      137,35 USD + KDV
      KDV Dahil:
      1.196,76 TL
      1196.76 www.domirobot.com
      144,79 TL'den başlayan taksit seçenekleri için tıklayın.
      15

      AÇIKLAMALAR

       
      • Intel Quad-core processor J4115 (14nm) with 4MiB Cache, up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
      • Dual-channel Memory DDR4-PC19200 (2400MT/s). Please look into the DRAM compatibility list first. Some memory modules are not compatible.
      • Total 32GiB RAM Space with two SO-DIMM slots
      • 4 x PCIe 2.0 for one M.2 NVMe storage
      • 2 x 2.5Gbit Ethernet ports
      • 2 x SATA 3.0
      • SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
      • Intel UHD Graphics 600 (Gen9.5 LP GT1) up to 700Mhz
      • HDMI 2.0 and DP 1.2 multiple 4K/60Hz video outputs
      • RTC / BIOS backup battery is included

      Please manually install Realtek RTL8125B driver to activate the Ethernet ports. Otherwise the Ethernet ports don’t work due to a missing device driver in Linux Kernel. 

      WiKi page: https://wiki.odroid.com/odroid-h2/start

      Ubuntu 20.04 x86 64bit OS compatible out of the box. Download the OS image from official Ubuntu homepage.

      Dual 4K/60Hz Monitors

      Demo Video

      Board Detail

      A CPU (Intel Celeron J4115 Processor) K 1 x DisplayPort 1.2
      B 2 x DDR4 SO-DIMM slots (Dual channel memory support) L 2 x RJ45 Ethernet Ports (10/100/1000/2500)
      C 1 x M.2 PCI Express Module Socket (NGFF-2280) M 5 x System LED Indicators
      D 1 x eMMC (Embedded Multimedia-Card) Socket N 1 x Peripheral Expansion Header (24-pin)
      E 2 x SATA Power Connectors(2.5mm pitch, JST-XH compatible) O 1 x Power Switch
      F 2 x SATA3 6.0 Gb/s Data Connectors P 1 x Reset Switch
      G 1 x DC Power Jack Q 1 x Backup Battery Connector (2-pin)
      H 2 x USB 3.0 R 1 x Active Cooling Fan Connector (4-pin)
      I 2 x USB 2.0 S 1 x Audio out
      1 x Audio in
      1 x SPDIF out
      J 1 x HDMI 2.0

      Specifications

      Form Factor
      • Dimensions: 110mm x 110mm x 47mm
      • Weight: 285 g including heatsink
      Processor
      • Intel Celeron J4115 Processor (14nm, TDP 10W)
      • Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
      • 4MB L2 Cache
      • UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
      • Fan-less design
      Memory
      • 2 x DDR4 1.2V SO-DIMM slots
      • Dual Channel, up to 2400 MT/s (DDR4-PC19200)
      • Max memory capacity 32GB
        • DDR3 is not supported
      Storage
      • 1 x eMMC connector (bootable and selectable on BIOS)
        • Various eMMC modules can be purchased at Hardkernel store
      • 2 x SATA3 6Gbps
      • 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
        • M.2 SATA SSD is not supported
      Networking
      • 2 x 2.5GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
      • Realtek RTL8125B
      • Supports Wake-On-Lan
      • LED indicators (Green: Link, Amber: Traffic)
      Video
      Audio
      • 1 x Audio out (3.5mm jack)
      • 1 x Audio in (3.5mm jack)
      • 1 x SPDIF out (ALC662, HDA codec)
      External I/O
      • 2 x USB 3.0 Host ports
      • 2 x USB 2.0 Host ports
      • 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
        • 1 x DC 5V, 1 x DC 3.3V, 5 x GND
        • 2 x UART (TXD/RXD/RTS/CTS)
        • 2 x I2C (SCL/SDA)
        • 1 x External Power Button
        • HDMI-CEC, 5VA+, D+, D-
        • All 3.3V I/O signal level
      • Note that you have to connect an HDMI-CEC adapter board(sold separately) to the 24-pin header to use the HDMI CEC function.
      Other features
      • Passive Heatsink
      • BIOS Backup Battery
        •  Maintains system time and BIOS settings
      • Power Button
      • Reset Button
      • System LEDS Indicators:
        •  Red (PWR) – Solid light when DC power is supplied
        •  Blue (left, ALIVE) – Solid light when System is running
        •  Blue (right, RESET) – When the RESET button is pressed
        •  Amber (SATA) – Flashes when there is data transfer
        •  Green (NVMe) – Flashes when there is data transfer
      • Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
        • Active Cooling Fan is optional
        • Connector (4-pin, 1.25mm pitch)
      Power
      • 1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
      • DC 14V ~ 20V (up to 60W)
        • DC 15V/4A power adaptor is recommended
      • Power consumption:
        •  IDLE : ?4W
        •  CPU Stress : ?14W
        •  CPU+GPU Stress : ?22W
        •  Power-off : ?0.5W
        •  Suspend : ?0.6W


       
      Diğer Özellikler
      Stok KoduDEV-02017
      MarkaHardkernel
      Stok DurumuVar

      İlginizi Çekebilecek Diğer Ürünler

      Ürün Etiketleri



      Bizi Takip Edin DomiRobot Müşteri Hizmetleri Hızlı Erişim  
      Twitter Hakkımızda Ödeme Seçenekleri Anasayfa  
            


       
      Facebook İletişim Bilgileri Kargo/Teslimat Hakkında Yeni Ürünler
      YouTube Banka Hesapları Kullanım Şartları İndirimdekiler
      Telegram  DomiPuan Sistemi Gizlilik Politikası Sepetim
          Üye Giriş/Yeni Üye İade ve Garanti Şartları Download
               
        

      PlatinMarket® E-Ticaret Sistemi İle Hazırlanmıştır.